December 14, 2016
December 14, 2016
Show all



About CastSeal™
CastSeal™ is a uniquely formulated, 2 part, VOC free Brush-On-Sealant™.  The very low viscosity ( 3-5 mPa-s 8-10 cps at 25° C) provides excellent wetting, and enables CastSeal™ to wick (through capillary action) into pores, welds, and seams and between close-fitting metal surfaces. Mixing the sealant’s two components creates a VOC-free, translucent red liquid that can be easily applied by brush.

Ideal Parts
CastSeal™ is design specifically to work with iron and steel castings, brazings and other ferrous parts.

Its room temperature cure mechanism is designed to cure within 24 hours for operational use.

Once cured, CastSeal™ withstands continuous service temperatures of up to 180° C (355° F) and resists a broad range of chemicals, including oils, glycol, chlorinated and fluorinated solvents, mild caustics, acid solutions, and water. Typical cured hardness is 78 Shore D (ASTM D2240).

Shelf Life
CastSeal™ has a shelf life of 12 months.

Pot Life
Once mixed, CastSeal™ has a pot life of 24-48 hours (longer if refrigerated), allowing multiple parts to be treated from the same kit.

Orders will ship within 24 hours of being processed.

SKU: CS-250. Category: .
Bulk order discounts are available for the following quantities. 10-14: 5% 15-24: 10% 25 and up: 15% The total price will be noted in your shopping cart.

Each kit contains the following:

  • Part A and B each in their separate 100ml bottle
  • Paint Brush
  • Gloves
  • Mixing stick
  • Instructions
  • Safety Data Sheet (SDS)
  • The packaging container doubles as a mixing container

Under limited quantity shipping regulations, CastSeal™ can be shipped by air or ground without restrictions.

Additional information
Weight .75 lbs
Dimensions 1 x 1 x 1 in
Reviews (0)


There are no reviews yet.

Be the first to review “CastSeal™”

Your email address will not be published. Required fields are marked *