WeldSeal™ is a uniquely formulated, 2 part, VOC free Brush-On-Sealant™. Very low viscosity ( 3-5 mPaÂ·s at 25° C) provides excellent wetting, and enables WeldSeal™ to wick (through capillary action) into pores, welds, and seams and between close-fitting metal surfaces. Mixing the sealant’s two components creates a VOC-free, translucent red liquid that can be easily applied by brush.
WeldSeal™ is design specifically to work iron and steel weldments, brazings and other ferrous parts
Its room temperature cure mechanism is designed to cure within 24 hours for operational use.
Once cured, WeldSeal™ withstands continuous service temperatures of up to 180° C (355° F) and resists a broad range of chemicals, including oils, glycol, chlorinated and fluorinated solvents, mild caustics, acid solutions, and water. Typical cured hardness is 78 Shore D (ASTM D2240).
WeldSeal™ has a shelf life of 12 months.
Once mixed, WeldSeal™ has a pot life of 24-48 hours (longer if refrigerated), allowing multiple parts to be treated from the same kit.
685-960 in² ( 4420 – 6200 cm²)
Orders will ship within 24 hours after being processed.
Each kit contains the following:
Under limited quantity shipping regulations, WeldSeal™ can be shipped by air or ground without restrictions.
|Dimensions||1 × 1 × 1 in|